Saturday 21 november 2009 6 21 /11 /Nov /2009 03:44

A wholly owned subsidiary of DuPont - DuPont today announced that its silicon thin film photovoltaic module production plant was officially opened. battery for camcorderThe completion of the installation reflects the commitment of DuPont in supporting solar and other technologies related to renewable energy to accelerate the reduction of oil dependence.

It is reported that DuPont factory occupies over 50,000 square meters (53.8 million square feet), equipped with photovoltaic thin line film solar cell module production, the annual capacity of 50 megawatts, is scheduled for first quarter of 2010, production at commercial scale. DuPont, provides not only by the International Electrotechnical Commission (IEC) type certification of innovative photovoltaic thin-film, it also provides the system of Chinese domestic market-wide solution to help protect customers for energy production renewable long-term investment.

Honeywell China National Petroleum

To develop bio-fuels

WASHINGTON unit UOPLLC Honeywell announced it has with the China National Petroleum [14.03 -0.92%] Natural Gas Corporation has signed a Memorandum of Understanding to jointly develop a variety of organic China, fuel technologies and projects.

We learn that the two companies will work together to design a Ecofining equipment, use of organic materials can produce green diesel fuel, but also the production of renewable aviation fuel. In addition, the two sides will also film in China, the use of ethanol technology to improve existing ethanol plants and to further assess the potential of energy efficiency.

UOP Renewable Energy and Chemicals Zhannifuhuo Holmgren, general manager, said the two sides will promote cooperation in the field of transportation feasibility of renewable energy development in China. Petroleum Refining and Chemical Company chief engineer, said Hu Jie, cooperative development of advanced bio-fuel technology "for promoting China's economy to low carbon and green economic development will have significance positively. "

New Zealand stopped immediately

The greatest nation in wind energy plan

People's Republic of China to the detriment of the original ecological landscape and threatens to undermine environmental reasons, New Zealand Environment Court has expressly rejected MeridianEnergy wind projects in the food company. The project is by far the largest program of New Zealand wind energy.

It is reported that the first phase of the project is the design capacity of 150 MW, located in the South Island Central Otago New Zealand. The region is a major tourist destination in New Zealand, mountains, rocky gorges and vineyards into a piece of well-known Dell HD438 batteryDell KD186 batteryDell Y9943 batteryat home and abroad. Environment, making this important decision, the court stated: "Although the construction of this project helps to improve the presentation of the national grid, but the well-known scenic spots in China to build such a huge wind power is very inappropriate . The Court's view that New Zealand, South Island has a more excellent candidates for sites of the power of the wind farm, but this MeridianEnergy not provide sufficient information.

Oil Production

Coal China's initial field-bed methane in the Digital

PRC central oil development in our country the first large-scale coal-bed methane fields of digital demonstration projects recently completed and commissioned in Shanxi Qinshui basin. The gas field is located in Shanxi Taihang Mountains Block Qinshui Basin, is an important base of high quality, coal mining, coal bed methane resources are unique, the volume of recoverable resources of more than 1 trillion cubic meters, coal in Shanxi, the bed methane reserves in the 2 / 3 in the third world.

It is reported that Shanxi digital Qinshui CBM Field demonstration project is the initial coal China-bed methane fields of cooperation projects fully equipped commercial. The project is the first in a low cost can be large scale promotion of automation technology, enables automation of the entire process of monitoring coal bed methane production to reach a position full unattended automation of entire process, the comprehensive monitoring and management, reduced tillage, reduced intensity of labor, reduce operational costs, greatly improve economic efficiency. At the same time, ensure security of coal bed methane development and production requirements.

Sinopec Overseas

Rights and interests of the oil production exceeded 10 million tonnes

WASHINGTON Sinopec Group, has announced that production overseas equity oil in 2009 will exceed 10 million tonnes mark. Sinopec Corp., which told the press, said: "The first group of assets of the listed company would have chosen a larger scale production and exploitation of maturity, especially in shareholder returns relatively high of oil and gas projects. He said the Sinopec Group in resources overseas in more oil and gas assets, there are sands, LNG and other assets, those assets may be the future in batches in the listed company.

It is reported that Sinopec Group Actions overseas oil production, year after year to grow rapidly. 2004-2008, overseas oil production rose equity from 205,000 tons to 9.01 million tonnes in 2009 will exceed 10 million tonnes. Until now, exploration projects abroad that the country has reached 47 in 18 countries in Africa, the Americas, the Middle East and other places have rights.

Huadian Power International Integrated break bottlenecks in coal-profit

WASHINGTON Huadian Power International Company for independent power company integrated coal in the transition, the road is gradually unfolded.Dell 6Y270 batteryDell 75UYF batteryDell C1295 battery Since the second half, the company has gone on the attack, one after another in coal resources in Shanxi, Ningxia, Inner Mongolia, an acquisition, a series of mergers and acquisitions market functioning is full of expectations.

According to reports, the main raw materials of coal as a society of energy production in the composition of the proportion of the cost of better business performance to its high sensitivity to price fluctuations. The face due to shortage of resources caused by rising coal prices, the company official said, will be the strategic cooperation, exploitation, acquisition integration, self-development and other forms efforts to promote the industry chain for rivers, changes in the drawback for the coal industry chain, and expansion of the field in the coal business, strategic long term development

Suntech Power to obtai

State subsidies for the solar roofs program

Suntech Power Holdings Co., Ltd. People's Republic of China announced that it has, and will participate in the construction of photovoltaic projects, has been the national grants solar roofs program, funded projects approved subsidies for the total cumulative installed capacity of over 91 megawatts to 20%.

In March this year, Housing and Urban-Rural Construction and the Ministry of Finance has also issued the "Regulations on accelerating the implementation easy battery  of applications for building solar PV", and "Solar PV applications for financial assistance finance the construction management measures, and implementation of subsidies for solar products used in construction to support China Solar Roofs Plan. "Suntech Power Holdings Co., Ltd. Shi Zhengrong, Chairman, said: "Suntech is building in the world, integrated photovoltaic technology and system integration, have the ability to provide turnkey customers, to satisfy their demand for clean energy

By battery wang
Enter comment - View the 0 comments
Thursday 19 november 2009 4 19 /11 /Nov /2009 04:15

from Foton Automotive Group to the formation of the Qinghai-cleaning God's Special Purpose Vehicle Enterprise - Futian Equipment Manufacturing camcorder batteriesCo., Ltd. Qinghai Xining City Economic Development Zone, bio-tech industry park-cum-foundation-laying ceremony of inauguration was held.

 Qinghai Fukuda Equipment Manufacturing Co., Ltd. is from Qinghai Economic Commission, Beijing Automotive Holding Company, led by Fukuda car and clean God Group Co., Ltd. a joint venture is expected to reach a total investment of 250 million yuan. The new company will focus on the use of Foton Auman heavy truck chassis of the production of tractors and other products, ordinary flatbed, dump trucks, sanitation trucks and cars and other fields.
 

 The new company put into operation, in order to stimulate production of special vehicles automotive industry in Qinghai Province, will form an annual output of 5,000 vehicles, various types of special units, vehicle sales income of more than 1 billion yuan, spare Dell 6Y270 batteryDell 75UYF batteryDell C1295 batteryparts, auto trade in services supporting the development of industrial clusters. The main sales market mainly in Qinghai Province, which covers Gansu, Ningxia, Tibet's three provinces.

 related   Links 

This year, the Provincial Economic Commission, established to implement the views of the equipment manufacturing industry, implementation deadline for the 2009 -2011 year. Advice is that by 2011, our province will focus on the development of semi-trailer tractor, van, warehouse gate vehicles, fuel and food trucks, tipper truck, airport special vehicles, oilfield special vehicles, and other special-purpose vehicles supply power to form various types of Special Purpose Vehicle 15000 / year production capacity. According to the status quo of China's truck industry, focusing on the development of light truck series and heavy-duty truck series cars, to form truck heavy truck, light truck, the 25000 / year production capacity. Accelerate top battery  the development of lithium battery electrode materials and lithium battery power for the development of electric vehicles, prepare the ground. By 2011, the whole industry realized sales income of more than 20% annual growth, forming machine tools, automobiles, sanitation equipment, as the leading equipment manufacturing industry, various types of machine tool production capacity to reach more than 2,450 units, including CNC machining center to reach 320 units, the product The NC rate of over 80%.

 

By battery wang
Enter comment - View the 0 comments
Thursday 19 november 2009 4 19 /11 /Nov /2009 03:53

Casio Computer has developed a shock-resistant, waterproof, dustproof performance of digital cameras. Not only adopted the tough design philosophy Laptop batteries has also achieved a thickness of only 19.9mm slim models. 』To『 EXILIM G ® brand name, and the pursuit of feature-rich, stylish "EX-G1" officially released.

※ 1: CIPA (Japanese Film Equipment Industries Association) standards.

Casio developed and designed in 1983 with a high strength impact resistant capacity of "G-SHOCK ®" watch. Because you can possess the capacity to use harsh environment and a unique fashion design won the consumers as well, has been popular since people around the world. At the same time, since the 2000 sale of a tough concept phone "G'zOne ®", an excellent impact resistance properties of water has been widely praised.

The EXILIM G 』『 release is suitable for "G" and the concept of popular culture, and to follow the user's digital camera, in the "tough" brand philosophy driven by Casio continue to accumulate over the years has been the impact resistance, waterproof, and thin-oriented technology and experience. Strong tectonic earthquake not only in the interior of the camera, camera case is also used. But also in the camera's thin edge grip Office has also improved the wealth of function keys.

』『 EXILIM G can be configured with high-precision shooting high-definition 1210-pixel CCD, the same time, carrying on "tenacity" of the quality achieved, you can ride or ski ※ 2 sports such as shooting photos the same time a certain time interval the interval between automatic shooting photography features.

Be able to tolerate the harsh environment of the "tenacity"

Impact resistance: The height of 2.13m (7ft.) the height of free fall tests ※ 3.

Waterproof performance: in line with IEC / JIS protection class 8 (IPX8) and 6 (IPX6) equivalent waterproof performance. In addition to a depth of 3m (10ft.) in water 60 minutes of continuous use ※ 4, would also be able to be patient in all directions from a direct jet of water.

Dust properties: the dust is not intrusive structure, in line with the equivalent IEC / JIS dust protection grade 6 (IP6X) dust properties.

. IPX5IPX6 low temperature performance: in -10 ℃ (14 ° F) low-temperature environment, the camera can also be used normally ※ 5.

Structural design: The stainless steel to withstand the impact of the external body and absorb impact and water-resistant glass fiber reinforced polycarbonate body within the dual structure. High-strength heat-resistant polycarbonate body to fill the near side of the shutter,  hp F4809A batteryhp F4812A batteryhp HSTNN-lB31 batteryhp PB991A batterythe lens resin lens protection around the ring, zinc die-casting system, lanyard holes, etc., are used to protect the body's tenacity to ease the impact of the design.

※ 2: the need to purchase another fixed camera bracket and so special. ※ 3: the United States MIL-STD-810F Method 516.5-Shock as a reference set of the company's testing standards, adopted from a height of 2.13m (7ft.) 26 directions fall Meranti plywood on product testing. But does not guarantee the full impact of no damage, error-free, guaranteed performance. In addition, the camera under attack may lead to waterproof affected. ※ 4: According to CASIO established test conditions. ※ 5: more than room temperature when the battery life shorter.

Equipped with shock-resistant waterproof and dustproof performance of thin digital camera

EXILIM G EX-G1

The slim style of tough

"Impact resistance"

Impact resistance, as with a digital camera has a thin 19.9mm (excluding protrusions) and slim-type body, through the company independently conducted, from a high 2.13 meters (7ft) at drop test.

"Waterproof and dustproof performance"

Comply with IEC / JIS protection class 8 (IPX8) waterproof performance, can be at a depth of 3m (10ft.) of water about 60 minutes of continuous use ※ 1 In addition, with the right jet 6 (IPX6) equivalent waterproof performance, can be directly flush with the water camera. To prevent dust intrusion with IEC / JIS dust protection grade 6 (IP6X) considerable dust properties.

※ 1: According to CASIO established test conditions.

"Resistance to low temperature performance"

-10 ℃ (14 ° F) low-temperature environment, the camera can be used normally ※ 2.

※ 2: more than room temperature when the shorter battery life.

Impact-resistant waterproof properties to achieve structural design of

"Shell"

* Resist shocks from the external stainless steel shell.

* The fuselage near the side of the shutter to absorb the impact of high-strength heat-resistant polycarbonate shell cover system.

* The placement of the powerful impact of zinc die-casting system, lanyard holes.

* Perfect closed shell memory card cover lock knob.

* Subsidiary removable to ease the impact of two kinds of protective gear.

"Internal structure"

* Glass fiber reinforced polycarbonate water system within the body.

* Reduce the screws used to ease the impact of the internal fuselage buckle lock mode.

* Filter used water immersion speaker and microphone.

"Lens Division"

* Buffer to receive the lens around the impact of resin lens protection ring.

• Prevention of light reflection and after waterproof coating enhanced to handle multi-glass lens protector.

* Shock has a soft lens of  hp Pavilion dv6000 batteryhp Pavilion DV1000 batteryhp Pavilion dv4000 batterysynthetic rubber bearings.

* Absorb shocks from the outside to protect the lens unit of high attenuation material.

"LCD"

* From the pressure and shocks than in the past to protect LCD screen 1.5 times thicker acrylic panels.

* Installed on the liquid crystal display to ease the impact of resin around the supporting frames.

Impact-resistant waterproof only with only the "BESTSHOT" feature

"Interval Photography"

To do cycling, snowboarding and windsurfing, etc. ※ 3, can be heated side of the movement, while a certain interval of the animation is like shooting still photos, can shoot so far difficult to obtain photographs of the difficult shock. Photography interval can be set as follows: 10 seconds / 30 seconds / 1 minute / 3 minutes, video time can be set to 3 minutes / 10 minutes / 20 minutes / 30 minutes.

※ 3: the need to purchase another special bracket fixed camera.

"Live shoot a wide variety of outdoor scenes"

Just choose the picture you want to shoot to shoot beautiful photos with "BESTSHOT" feature, you can shoot the perfect photo. Added a variety digital battery  of outdoor scenes, there could be corrections due to the high brightness of snow and sun exposure arising from lack of "snow" "Beach" mode, the water can shoot clear pictures motley remove the "beautiful water" mode.

 

By battery wang
Enter comment - View the 0 comments
Monday 16 november 2009 1 16 /11 /Nov /2009 06:59
Electronic equipment not working properly, unless all of the transistors, or switches, allowing the internal currents, they can easily last. A team oflaptop ac adapter engineers has to determine why the number of transistors made of organic crystals is not satisfactory, which makes how to make them work better idea.

An overview of organic materials with the performance of electronic products frustrating contradictions researchers at Stanford University shows how different the film boundaries between crystals can be aligned to 70-fold difference in how easy it is current or free power, can be through the transistor.

The study, which will help engineers design better digital display and other devices, was published in the journal Nature Materials November 8.

Organic semiconductors accomplish a great deal of e-mail. They are cheap and flexible, in the production process simpler than the traditional silicon chips. Such as computer screens, signs or digital magazine application of making the "electronic paper" is the opportunityhp 338794-001 batteryhp 361742-001 batteryhp 371785-001 batteryhp 417066-001 battery for more than 10 years, but their potential seems to always just around the corner. An eternal problem is that transistor transistor performance changes far more than can be commercially viable devices allowed.

"You can only device, has a strong" liquidity management ", but you really need to make hundreds of thousands," said Alberto Salleo, assistant professor of materials science and engineering at Stanford University and the company - one of the authors . "Study Group report, most of the mobility of the rapid changes. We are here trying to understand what the reasons for variation."

System

Salleo a research group led by the multi-disciplinary team made a transistor, the performance of polycrystalline-compatible devices may be the culprit systems research: "grain" boundaries between crystals. It appears that the difference in the boundary line can be a path to be followed by the charge transistor is more like a messy slog through airport security than the runner-up dashboard.

Review of the role of the boundary line, the article first author, graduate student Jonathan Rivnay, an increase of organic semiconductor crystals known as PDI8 - CN2 network, at Northwestern University and the Polya Inc., a company's comprehensive 'organic electronic devices, the use of procedures to ensure that the same direction, aligned in a particular crystal glass.

He then transistors could cost between that person and Molecular unanimously adopted, and in its molecular and consistent in the grain boundary. In the first type of transistor has much better. Further, he hung on the accumulation of crystalline molecular nature of these restrictions.

In addition to direct measurement of the electrical team, from the use of the co-author John E theoretical calculations carried out a detailed information, the  battery for carema researchers Northrup Xerox Palo Alto Research Center, and with the X-ray analysis of the co-author of Michle tonny at Stanford Synchrotron Radiation Lightsource leadership.

May affect the future production

Rivnay said that the group's work could significantly affect how the e-crystals of organic made in the future.

He said: "awareness of the issue of organic electronic material defects, including food, including the boundaries is very important to the application of any equipment, saying:" Rivnay. "By understanding what happened to these boundaries, and how they are harmful for improvement in the chemical end of the year, as well as design and manufacturing process is complete. In this way, devices can be repeated and more effective."

Other authors are graduate students at Stanford University Jimusenlai Leslie in Materials Science and Engineering Rodrigo Noriega in applied physics, Northwestern University chemist Tobin trademark; Polya researcher Shaofeng Road and the north-west and digital battery technology teachers Polya Director, Antonio Facchetti. These funds come from several U.S. federal agencies, including the Ministry of Defense and the Department of Energy and the National Science Foundation and the King Abdullah University of Science and Technology sector in Saudi Arabia.
By battery wang
Enter comment - View the 0 comments
Friday 13 november 2009 5 13 /11 /Nov /2009 04:29

In order to improve medical, industrial and consumer electronics products, convenience, application developers constantly working to upgrade the wireless f toshiba batterysatelite batteryunctionality. Texas Instruments Inc. (TI) today announced the industry's first passive low-frequency interface (PaLFI) devices as a new product line, the first solution, that it can wirelessly for ultra-low-power MSP430 microcontroller (MCU) to provide energy, so that even in the MCU options are exhausted battery case can also be run correctly. For example, PaLFI not only with the implantable medical device for remote communications, and also for its power supply, so that the whole process as far as possible to achieve non-interventional treatment. In addition to also applies to many other potential applications, the device also applies to the pipeline operation or container tracking, and as CD / DVD players and measuring instruments and other electronic equipment terminal network configuration.



PaLFI low-frequency wireless interface device will be a perfect combination with the SPI interface, can be defined activation / communications within the region to ensure the realization of ultra-stable communication performance. Upcoming product line includestoshiba PA3395U-1BRS batterytoshiba PA3399U-1BAS batterytoshiba PA3399U-1BRS battery not only have the security / authentication features derived from the program, but also includes non-battery charging capabilities, memory capacity of the smaller low-cost version of the terminal is ideal for applications such as network configuration.

The main features and benefits PaLFI

• Through RF domains, battery testing and charging capabilities to support implants, such as sealing equipment operation;

* Users can LF 134kHz through the SPI interface with wireless access PaLFI memory, which can be accessed for more memory, the microprocessor;

* The device can be battery-powered MSP430 MCU to provide energy and can be the case in the absence of the battery also allows the normal operation of the microprocessor, thereby ensuring the availability of data and prevent data loss;

Low frequency (LF) to ensure that a clear definition of the stability of the region read the communication;

When the PaLFI with the battery connected, you do not need batteries can also be data to programmatically write to memory, allowing for configuration or calibration operation of MCU to read and use content.

Pricing and Availability

TMS37157 PaLFI a 16-pin QFN package. PaLFI evaluation kit eZ430-TMS37157, including the development eZ430 MSP430F1612 USB memory stick, http://www.ec8080.com/and the use of MSP430F2274 and TMS37157 PaLFI the MSP430 target board. The device has begun to supply with the kit is available through TI distributors immediately ordered at www.ti.com / palfi_prestore.

In addition to PaLFI evaluation kit outside, Amber Wireless also provides Gateway AMB3020 by leaps and bounds in order to help developers to achieve PaLFI-based design. The suite includes with PaLFI TMS37157 and AMB8425 868 MHz radio modules, circuit boards, as well as the MSP430F2272 and the CC1101 RF transceiver host controller devices. In addition, the kit also includes as a host transceiver AMB8465 USB memory sticks, enables battery-powered high-speed long-range communication applications. Typical applications are active tags, triggered by low-frequency PaLFI interface to achieve container tracking.

By battery wang
Enter comment - View the 0 comments

Overview

Create a blog

Calendar

February 2012
M T W T F S S
    1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29        
<< < > >>
Create your blog for free on over-blog.com - Contact - Terms of Service - Earn Royalties - Report abuse